SWD9515 e lenngoeng marulelong a metso ea marulelo a hanyetsanang le tšireletso e khethehileng ea polyurea e sireletsang metsi

lihlahisoa

SWD9515 e lenngoeng marulelong a metso ea marulelo a hanyetsanang le tšireletso e khethehileng ea polyurea e sireletsang metsi

tlhaloso e khuts'oane:

SWD9515 ke 100% e tiileng e nang le monko o monate oa polyurethane elastomer.E na le ts'ebetso e ntle ea ho phunya, ho hanyetsa ho kenella, anti-corrosion le ts'ebetso e sa keneleng metsi, e ka thibelang ho phunya ha metso ea semela ka nepo, ho qoba ho lutla ha metsi ho bakoang ke ho phunya limela.SWD polyurea e 'nile ea sebelisoa haholo mererong ea marulelo a lenngoeng Chaena le linaheng tse ling.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Likarolo tsa sehlahisoa le melemo

* Ha e na Solvent, 100% litaba tse tiileng, li bolokehile, ha li na tikoloho ebile ha li na monko.

*Kalafo e potlakileng, e ka fafatsoa ka sebopeho leha e le sefe se kobehileng, letsoapong le sebakeng se otlolohileng, ha ho sagging.

* Ho roala ho teteaneng, ha ho na moroallo, ho tenyetseha hantle.

* Matla a matla a ho khomarela, ho tlamahanngoa ka potlako ho tšepe, konkreite, lehong, likhoele tsa khalase le likaroloana tse ling.

* Ho hanyetsa tšusumetso e ntle haholo, ho hanyetsa abrasion

* Ho hanyetsa kutu e ntle haholo le ho hanyetsa lik'hemik'hale ho acid, alkali, letsoai joalo-joalo.

* Ho hanyetsa ho phunya ho matla ho khahlano le motso oa semela, ho hanyetsa ho kenella le ho se kenelle ha metsi

* Ts'ebetso e ntle ea ho ts'oaroa

*Ho hanyetsa ka mokhoa o babatsehang ho fapana ha mocheso

* Pheko e potlakileng, sebaka sa kopo se khutlela ts'ebeletso kapele

* Ho tšoarella ho hoholo ho fokotsa litšenyehelo tsa tlhokomelo ea bophelo ba ts'ebeletso

* Eketsa bophelo ba ts'ebeletso ea sebopeho se fafalitsoeng

Lisebelisoa tsa Sehlahisoa

Tšireletso e sa keneleng metsi ka metso ea serapa sa marulelo, lisekoere tsa litoropo le marulelo a mang a lenngoeng

Lintlha tsa sehlahisoa

Ntho A B

 

Ponahalo Mokelikeli o mosehla o mosehla Mmala o fetohang
Matla a khoheli (g/m³) 1.13 1.04
Viscosity (cps)@25℃ 810 670
Litaba tse tiileng (%) 100 100
Ho kopanya karo-karolelano (karolelano ea molumo) 0 0
Nako ea gel(ea bobeli)@25℃ 1 1
Nako ea ho omella (ea bobeli) 3-5
Kakaretso ea Khopolo (dft) 1.02kg/㎡ botenya ba filimi: 1mm

Lintho tsa 'mele tsa lihlahisoa

Lintho Tekanyetso ea teko Sephetho
Ho thatafala (Lebopo A) ASTM D-2240 89
Sekhahla sa bolelele (%) ASTM D-412 450
Tensile matla (Mpa) ASTM D-412 17
Matla a ho lla (N/km) ASTM D-624 65
Ho se lekane (0.3Mpa/30min) HG/T 3831-2006 e sa kenelleheng
Ho hanyetsa ho roala (750g/500r)/mg HG/T 3831-2006 4.2
Matla a ho khomarela (Mpa) motheo oa konkreite HG/T 3831-2006 3.4
Matla a ho khomarela (Mpa) motheo oa tšepe HG/T 3831-2006 11
Density (g/cm³) GB/T 6750-2007 1.02
Ho arohana ha Cathodic [1.5v, (65±5) ℃,48h] HG/T 3831-2006 ≤15 limilimithara

Tlhaloso ea kopo

Hlohlelletsa junifomo ea karolo ea B pele ho kopo, kopanya ka botlalo li-pigment tse kentsoeng, kapa boleng ba sehlahisoa bo tla ameha.

fafatsa polyurea ka nako e loketseng haeba bokaholimo ba substrate bo hloekisitsoe.Bakeng sa mokhoa oa kopo le nako ea nako ea SWD polyurea speical primer ka kopo sheba bukana e 'ngoe ea lik'hamphani tsa SWD.

Kamehla sebelisa SWD spray polyurea sebakeng se senyenyane pele kopo e kholo ho hlahloba karolelano ea motsoako, 'mala le phello ea spray li nepahetse.Bakeng sa lintlha tse qaqileng tsa kopo ka kopo sheba leqephe la morao-rao la litaelo lalitaelo tsa tšebeliso ea SWD spray polyurea series.

Nako ea pheko ea sehlahisoa

Mocheso oa substrate Omme Sephethephethe sa maoto E tiileng e ommeng
+10 ℃ 20s 45 mets 7d
+20 ℃ 15s 15 mets 6d
+30 ℃ 12s 5 mets 5d

Tlhokomeliso: nako ea ho phekola e fapana ho ea ka boemo ba tikoloho haholo-holo mocheso le mongobo o lekanyelitsoeng.

Shelf bophelo

* Ho tloha ka letsatsi la moetsi le boemong ba sephutheloana sa mantlha se tiisitsoeng:

A: Likhoeli tse 10

B: Likhoeli tse 10

*Mocheso oa polokelo: +5-35°C

Ho paka: Karolo ea A 210kg/drum, karolo ea B 200kg/drum

Etsa bonnete ba hore sephutheloana sa sehlahisoa se tiisitsoe hantle

* boloka sebakeng se pholileng le se nang le moea o pholileng, qoba ho pepesehela letsatsi ka kotloloho.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona