SWD9007 kotopo ea sephethe-phethe e khethehileng e thibelang mollo polyurea anticorrosion coat e sireletsang

SWD9007 kotopo ea sephethephethe e khethehileng ea retardant polyurea anticorrosion protective coating

tlhaloso e khuts'oane:

SWD9007 kotopo ea sephethephethe e khethehileng ea retardant polyurea ke 100% e tiileng e nang le monko o monate oa polyurea elastomer.Ha e na feela litšobotsi tse ntle tsa 'mele tsa polyurea, empa hape e ka tima hang ka mor'a hore e khelohe mollong, joale e se e sebelisoa haholo mererong ea kotopo ea Chaena.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Likarolo tsa sehlahisoa le melemo

* Ha e na Solvent, 100% litaba tse tiileng, li bolokehile, ha li na tikoloho ebile ha li na monko.

*Kalafo e potlakileng, e ka fafatsoa ka sebopeho leha e le sefe se kobehileng, letsoapong le sebakeng se otlolohileng, ha ho sagging.

* Ho roala ho teteaneng, ha ho na moroallo, ho tenyetseha hantle

* Matla a phahameng a sekhomaretsi, a ka potlakisa maqhama hantle ho substrate e ngata joalo ka tšepe, konkreite, lehong, khalase ea fiber joalo-joalo.

* Ho hanyetsa tšusumetso e ntle haholo, ho hanyetsa abrasion

* Ho hanyetsa kutu e ntle haholo le ho hanyetsa lik'hemik'hale ho acid, alkali, letsoai joalo-joalo.

* Ts'ebetso e ntle e sa keneleng metsi

* Ts'ebetso e ntle ea ho ts'oaroa

*Ho hanyetsa ka mokhoa o babatsehang ho fapana ha mocheso

* Pheko e potlakileng, sebaka sa kopo se khutlela ts'ebeletso kapele

* Ho tšoarella ho hoholo ho fokotsa litšenyehelo tsa tlhokomelo ea bophelo ba ts'ebeletso

* Eketsa bophelo ba ts'ebeletso ea sebopeho se fafalitsoeng

Likarolo tsa ts'ebeliso

Tšireletso e thibelang mollo e thibelang ho bola ha metsi ea liporo, litsela, terene e tsamaeang ka tlas'a lefatše le lipalangoang tse ling.

Lintlha tsa sehlahisoa

Ntho	A	B
Ponahalo	Mokelikeli o mosehla o mosehla	Mmala o fetohang
Matla a khoheli (g/m³)	1.12	1.22
Viscosity (cps) @25℃	800	880
Litaba tse tiileng (%)	100	100
Remix ratio (ka bophahamo ba modumo)	1	1
Nako ea gel (ea bobeli) @25℃	4-6
Nako e omileng ka holim'a metsi (ea bobeli)	15-40
Kakaretso ea Khopolo (dft)	1.08kg/㎡ Botenya ba filimi 1mm

Lintho tsa 'mele

Ntho	Tekanyetso ea teko	Sephetho
Ho thatafala (Lebopo A)	ASTM D-2240	92
Sekhahla sa bolelele (%)	ASTM D-412	180
Tensile matla (Mpa)	ASTM D-412	8
Matla a ho lla (N/km)	ASTM D-624	60
Ho se lekane (0.3Mpa/30min)	HG/T 3831-2006	e sa kenelleheng
E ka Apara (750g/500r)/mg	HG/T 3831-2006	1.2
Matla a ho khomarela (Mpa) motheo oa konkreite	HG/T 3831-2006	3.2
Matla a ho khomarela (Mpa) motheo oa tšepe	HG/T 3831-2006	11.3
Density (g/cm³)	GB/T 6750-2007	1.08
Ho arohana ha Cathodic [1.5v, (65±5) ℃,48h]	HG/T 3831-2006	≤15 limilimithara
Sethibela mollo	GB8624-2012	B1