SWD900 fafatsa polyurea elastomer anticorrosion e thibelang metsi e thibelang metsi
Likarolo tsa sehlahisoa le melemo
* Ha e na Solvent, 100% solids, e bolokehile, e na le tikoloho ebile ha e na monko.
*Kalafo e potlakileng, e ka fafatsoa ea theha sebakeng sefe kapa sefe se kobehileng, setsoapong le se emeng ntle le ho sisinyeha.
* Ho roala ho teteaneng, ha ho na moroallo, ho tenyetseha hantle.
* Matla a phahameng a sekhomaretsi, ho tlamahanngoa ka potlako ho tšepe, konkreite, lehong, likhoele tsa khalase le likaroloana tse ling.
* Ho hanyetsa tšusumetso e ntle haholo, ho hanyetsa abrasion
* Anticorrosion e ntle haholo le khanyetso ea lik'hemik'hale ho acid, alkali, letsoai joalo-joalo.
* Ts'ebetso e ntle e sa keneleng metsi
* Ts'ebetso e ntle ea ho ts'oaroa
*Ho hanyetsa ka mokhoa o babatsehang ho fapana ha mocheso
* Pheko e potlakileng, sebaka sa kopo se khutlela ts'ebeletso kapele
* Ho tšoarella ho hoholo ho fokotsa litšenyehelo tsa tlhokomelo bophelo bohle
* Eketsa bophelo ba ts'ebeletso ea sebopeho se fafalitsoeng
Likarolo tsa ts'ebeliso
Anticorrosion le tšireletso e sa keneleng metsi ea kaho, lik'hemik'hale, lipalangoang, metallurgy, matla a motlakase, sefofane, likepe, ho haha likepe le masimo a mang.
Lintlha tsa sehlahisoa
| Ntho | Karolo ea A | Karolo ea B |
| Ponahalo | Mokelikeli o mosehla o mosehla | Mmala o fetohang |
| Matla a khoheli (g/m³) | 1.12 | 1.05 |
| Viscosity (cps)@25℃ | 800 | 650 |
| Litaba tse tiileng (%) | 100 | 100 |
| Kopanya karo-karolelano (ka molumo) | 1 | 1 |
| Nako ea gel (ea bobeli）@25℃ | 4-6 | |
| Nako e omileng ka holim'a metsi (ea bobeli) | 15-40 | |
| Kakaretso ea maikutlo (dft) | 1.08kg/㎡ botenya ba filimi: 1mm | |
Lintho tse tloaelehileng tsa 'mele
| Ntho | Tekanyetso ea teko | Sephetho |
| Ho thatafala (Lebopo A) | ASTM D-2240 | 92 |
| Sekhahla sa bolelele (%) | ASTM D-412 | 480 |
| Tensile matla (Mpa) | ASTM D-412 | 19 |
| Matla a ho lla (kN/m) | ASTM D-624 | 68 |
| Ho se kenelle hantle (0.3Mpa/30min) | HG/T 3831-2006 | E sa kenelleheng |
| Ho hanyetsa ho roala (750g/500r)/mg | HG/T 3831-2006 | 4.2 |
| Matla a ho khomarela (Mpa) motheo oa konkreite | HG/T 3831-2006 | 3.2 |
| Matla a ho khomarela (Mpa) motheo oa tšepe | HG/T 3831-2006 | 11.3 |
| Density (g/cm³) | GB/T 6750-2007 | 1.02 |
| Ho arohana ha Cathodic [1.5v, (65±5) ℃, 48h] | HG/T 3831-2006 | ≤15 limilimithara |
Ho hanyetsa lik'hemik'hale
| Ho hanyetsa asiti 10% H2SO4 kapa 10%HCI,30d | Ha ho mafome, ha ho na lipululana, ha ho na lekhalo |
| Ho hanyetsa alkali 10% NaOH, 30d | Ha ho mafome, ha ho na lipululana, ha ho na lekhalo |
| Ho hanyetsa letsoai 30g/L,30d | Ha ho mafome, ha ho na lipululana, ha ho na lekhalo |
| Ho hanyetsa ho fafatsa letsoai, 2000h | Ha ho mafome, ha ho na lipululana, ha ho na lekhalo |
| Ho hanyetsa oli 0# diesel, e tala, 30d | Ha ho mafome, ha ho na lipululana, ha ho na lekhalo |
| (Bakeng sa litšupiso: lintlha tse ka holimo li fumanoa ho latela tekanyetso ea tlhahlobo ea GB/T9274-1988. Ela hloko tšusumetso ea moea, ho phatloha le ho qhalana. Ho khothaletsoa tlhahlobo ea ho qoelisoa ka boikemelo haeba e hloka lintlha tse ling tse khethehileng) | |
Tikoloho ya kopo
| Mocheso oa tikoloho | 0 ℃-45 ℃ |
| Mocheso oa sehlahisoa pele ho mocheso | 65℃-70°C |
| Pipe mocheso pele ho mocheso | 55 ℃-65 ℃ |
| Mongobo o amanang | ≤90% |
| Ntlha ea phoka | ≥3℃ |
Tataiso ea kopo
| Khothalletsa mochini oa spray | GRACO H-XP3 Polyurea spray lisebelisoa |
| Sethunya se fafatsang | Fusion-air purge kapa mechanical purge |
| Khatello e tsitsitseng | 2300-2500psi |
| Khatello e matla | 2000-2200psi |
| Khothalletsa botenya ba filimi | 1000-3000μm |
| Nako ea ho khutlisa | ≤6h |
Tlhaloso ea kopo
Hlohlelletsa junifomo ea karolo ea B pele ho kopo, kopanya ka botlalo li-pigments tse kentsoeng, kapa boleng ba sehlahisoa bo tla ameha.
Fafatsa polyurea ka nako e nepahetseng haeba bokaholimo ba substrate bo lokisitsoe.Bakeng sa mokhoa oa kopo le nako ea nako ea SWD polyurea speical primer ka kopo sheba bukana e 'ngoe ea k'hamphani ea SWD.
Kamehla sebelisa SWD900 sebakeng se senyenyane pele kopo e kholo ho hlahloba karo-karolelano ea motsoako, 'mala le phello ea spray li nepahetse.Bakeng sa lintlha tse qaqileng tsa kopo ka kopo sheba leqephe la morao-rao la litaelo lalitaelo tsa tšebeliso ea SWD spray polyurea series.
Nako ea ho lokisa sehlahisoa
| Mocheso oa substrate | Omme | Sephethephethe sa maoto | E tiileng e ommeng |
| +10 ℃ | 30s | 45 mets | 7d |
| +20 ℃ | 23s | 15 mets | 6d |
| +30 ℃ | 17s | 5 mets | 5d |
Tlhokomeliso: nako ea ho phekola e fapana ho ea ka boemo ba tikoloho haholo-holo mocheso le mongobo o lekanyelitsoeng.
Shelf bophelo
* Ho tloha ka letsatsi la moetsi le boemo ba sephutheloana sa mantlha se tiisitsoeng:
Karolo ea A: Likhoeli tse 10
Karolo ea B: Likhoeli tse 10
*Mocheso oa polokelo: +5-35°C
Ho paka: Karolo ea A 210kg/drum, karolo ea B 200kg/drum
Etsa bonnete ba hore sephutheloana sa sehlahisoa se tiisitsoe hantle
* boloka sebakeng se pholileng le se nang le moea o pholileng, qoba ho pepesehela letsatsi ka kotloloho.
Lintlha tsa bophelo bo botle le polokeho ea sehlahisoa
Bakeng sa tlhahisoleseling le likeletso mabapi le ts'ebetso e bolokehileng, polokelo le ho lahloa ha lihlahisoa tsa lik'hemik'hale, basebelisi ba tla bua ka Leqephe la Boitsebiso la Tšireletso ea Material la morao-rao le nang le lintlha tsa 'mele, tsa tikoloho, tsa chefo le tse ling tse amanang le polokeho.
Phatlalatso ea botšepehi
SWD e tiisa hore lintlha tsohle tsa tekheniki tse boletsoeng leqepheng lena li thehiloe litekong tsa laboratori.Mekhoa ea 'nete ea tlhahlobo e ka fapana ka lebaka la maemo a fapaneng.Ka hona, ka kopo, leka 'me u netefatse hore e sebetsa.SWD ha e nke boikarabelo bo bong ntle le boleng ba sehlahisoa mme e boloka tokelo ea liphetoho leha e le life ho data e thathamisitsoeng ntle le tsebiso pele.
-
SWD8029 likarolo tse peli tsa polyaspartic topcoat
-
SWD951 fafatsa polyurea elastomer bohloa bo sa keneleng metsi...
-
SWD8030 likarolo tse peli tsa polyaspartic top coating
-
SWD foam&sculpture solvent free hand appli...
-
SWD969 Metallic anticorrosion coatings
-
SWD860 solvent mahala mosebetsi o boima oa ceramic organic ...
